The bolt pattern of Volkswagen Polo wheels is a very important parameter that the car owner needs to know when selecting a new set rims For of this car. In some sources, another name for this parameter is often found - drilling. This data is very important to know how the wheel is attached to the suspension components.

Volkswagen Polo Sedan is a very practical, economical and popular vehicle on the roads of Russia and beyond. The high popularity is associated with the brand’s pleasant pricing policy for this model and the excellent level of quality. Volkswagen Group is constantly improving its models, implementing latest developments and achievements achieved on other brands.

Wheel bolt pattern "Volkswagen Polo"

Year of release of this legendary model can be called 1975. It is still in production and has gone through many generations. The car is constantly among the top ten most popular and best-selling vehicles in the world. The model has earned very high distribution and critical reviews. Thanks to the excellent quality, which is strictly observed and controlled in the brand's factories, Polo has gained many fans around the world

Wheel rims installed on a car most affect its behavior on the road surface, handling, dynamic qualities and other characteristics. Knowing the drilling parameters and wheel sizes for the Polo, you can select and purchase tires for it from a very large assortment. Discs of high-quality and well-known brands will help to perfectly update appearance car and separate it from the stream. Most often, car owners change wheels due to the change of season, but this also happens due to increased wear or a desire to improve the appearance with tuning.

Note!

Choosing original factory wheels will allow the car to fully demonstrate all its characteristics.

If the original appearance of the car becomes boring, then in this case tuning comes to the rescue, which allows you to improve the car technically and visually. It is possible to replace certain components with improved, sportier and more attractive ones. The main element on which the appearance depends vehicle, we can safely call it wheel rims.

In this regard, car owners most often change them first. However, for any car, wheels are not only part of the design, but also an important technical component. Road stability, handling and dynamic qualities depend on the characteristics and properties of tires and wheels, weight and many other properties.

New wheels must comply with the original factory parameters and characteristics.

When selecting a set of products, the bolt pattern for Polo must be taken into account as the most important part. It is also necessary to choose the right tires, since incorrect sizes will have a bad effect on operation.

The drilling parameter determines whether it is possible to install the selected rims on the car. If these parameters do not correspond, then special adapter rings should be used, which entails mandatory intervention in the factory design.

Note!

Unlike the younger model, the wheel bolt pattern of the Volkswagen Jetta has slightly different parameters and is similar to the Passat.

Volkswagen Polo rims: bolt pattern

What does this parameter include on a Volkswagen car?

The bolt pattern, regardless of model and configuration, is designated PCD, which stands for Pitch Circle Diameter. To explain it as simply as possible, the meaning of the indicator is the required number of bolts to attach the rim to the suspension and the diameter on which the mounting holes are located. This information is important when choosing a new set of wheels. To avoid unnecessary problems, this data is unchanged for one specific model.

On a note!

Knowing the value, you can choose from the disks available for sale that are of the highest quality and most suitable.

Visually, it is almost impossible to correctly determine the diameter as opposed to the number of fasteners. You can measure the size yourself: for this you will need a ruler, but it is better to use a caliper. The obtained data must be inserted into special formulas, which are different for disks with three, four and five fasteners.

It is imperative to remember that the incorrect selection of wheels or tires for VW models can, at a minimum, simply waste a lot of time. Because unsuitable wheels will need to be returned back to the store and replaced with normal ones. In the worst case, incorrect installation can lead to a deterioration in the level of traffic safety due to the fact that the wheels are directly responsible for the quality of the vehicle's behavior on the road surface.

You need to choose the correct wheel size based on standard parameters, which are specified by the manufacturer.

What is the wheel bolt pattern on a Volkswagen Polo sedan?

The Volkswagen Polo sedan version is equipped with rims with the following dimensions and parameters:

• R14/5.0J PCD 5×100 ET 35 DIA 57.1 - “Trendline” version;
• R15/6.0J PCD 5×100 ET 38 DIA 57.1 - maximum Highline configuration.

The drilling size of the model is 5×100, the reach dimensions are from 35 to 38 millimeters, the diameter center hole- 57.1 millimeters. When selecting products for a car, you must be guided only by these parameters; others simply will not work.

It is also important to take into account the width of the wheel rim, which in this case varies from 5.0 to 6.0. When choosing this larger size, you must take into account that the wheels may simply not fit in the arch. In addition, the offset parameter, designated ET, also varies, since it depends on the width of the rim. If this size is selected poorly, handling will be negatively affected and increased load will be placed on the suspension components.

All listed parameters and dimensions must be strictly observed. If some can be changed within certain limits, then it is undesirable to go beyond these limits.

Among the main features of the bolt pattern for the Polo model, one can highlight the prevalence of this parameter among European manufacturers. Related models from Skoda also received identical wheels. In this regard, there should be no problems with the selection of disks.

The bolt pattern of the latest generation Polo wheels is absolutely identical to the previous ones. To secure the wheels, five bolts are used, the mounting holes for which are located in a circle with a diameter of 100 millimeters. This means that wheels from an older modification can be installed on a new one, and vice versa. This makes life easier for car owners. For example, the wheel bolt pattern for Golf 4 is identical to Polo.

Fourth generation Golf

Parameters for various other brand models

On a note!

When changing generations, a car manufacturer most often increases the size of installed rims and wheel arches. But most often they try to leave the bolt pattern parameters the same. This makes product replacement easier for drivers and reduces the cost of production conversions for manufacturers. Knowing the parameter guarantees that the product will fit exactly.

The Touareg wheel bolt pattern and other required rim dimensions are equal to the following data:

• The number of mounting holes and the diameter of their location circle is 5x130;
• The diameter of the car hub is 71.5 millimeters;
• Rim diameter - from 17 to 20 inches;
• Rim offset - from 55 to 60 millimeters;
• Recommended width is 7.5 to 9.0 inches.

The bolt pattern for the Tiguan and the recommended wheel sizes for it are as follows:

• The rim drilling is 5×112;
• Rim width - from 6.5 to 9.0 inches;
• Rim diameter - from 16 to 19 inches;
• Wheel offset - ET from 33 to 38 millimeters;
• The diameter of the central hole is 57.1 millimeters.

Model Volkswagen Touareg latest generation

The Jetta wheel bolt pattern is 6 and the rim dimensions are equal:

• The rim drilling is 5×112;
• Rim width - from 6.0 to 8.0 inches;
• Rim diameter - from 16 to 18 inches;
• Wheel offset - ET from 47 to 54 millimeters.

Golf wheel bolt pattern 2 and other dimensions are equal:

• The rim drilling is 4×100;
• Rim width - from 5.0 to 5.5 inches;
• Rim diameter - from 13 to 15 inches;
• The diameter of the central hole of the rim is 57.1 millimeters;
• Wheel offset is 45 millimeters.

Note!

The bolt pattern of the T4, a small minibus from the Volkswagen concern, was 5x112.

Drilling parameters for German sedan“Volkswagen Polo” must be observed when selecting wheels. This parameter can be measured independently, but this does not guarantee perfect accuracy. It is recommended to watch it in the official technical documentation to the car.

Tire markings, wheel size Polo Sedan

On Volkswagen cars Polo sedan Depending on the configuration, tires of the following sizes are installed: 175/70 R14, 185/60 R15, 195/55 R15.

The tire designation is printed on its sidewall.

For example, the designation 195/55 R15 85Н deciphered as follows:

• 195 – tire width, mm;
• 55 – ratio of height to profile width, %;
• R– radial tire;
• 15 – disk diameter in inches;
• 85 – load capacity index (Table 14.1);
• N– speed index (Table 14.2).

You will find a large selection in the online tire store. When choosing auto products for your car on the Internet, you receive highly qualified service and always a large selection.

Load capacity index
50	190
51	195
52	200
53	206
54	212
55	218
56	224
57	230
58	236
59	243
60	250
61	257
62	265
63	272
64	280
65	290
66	300
67	307
68	315
69	325
70	335
70	345
72	355
73	365
74	375
75	387
76	400
77	412
78	426
79	437
80	450
81	462
82	475
83	487
84	500
85	515
86	530
87	545
88	560
89	580
90	600
91	615
92	630
93	650
94	670
95	690
96	710
97	730
98	750
99	775
100	800
101	825

Sometimes, in addition to the load capacity index or instead of it, the permissible load is indicated on the tire - "MAX LOAD 515 KG".

Speed ​​index	Maximum speed, km/h
A	40
B	50
C	60
D	65
E	70
F	80
G	90
J	100
K	110
L	120
M	130
N	140
P	150
Q	160
R	170
S	180
T	190
U	200
H	210
V	240
W	270
Y	300

On lateral surface Depending on the type and country of manufacturer, tires may be marked with additional symbols that provide more detailed information about this model. Below are the most common notations:

Reinforced(reinforced) – tire with increased load capacity;

Regroovable– tire with the possibility of deepening the pattern by cutting;

Steel(Steel belted) – a tire with a surrounding metal cord;

Sometimes on the sidewall of the tire, instead of the “Steel” designation (or in addition to it), a complete list of materials that make up the individual elements of the tire tread structure (“Plies tread” is the composition of the tread layer) may be indicated.

TWI(tread wear index) or triangular symbol - indicates the location of the wear indicators.

Wear indicators are made in the form of protrusions A inside the tread grooves. Once the tread wears down to the level of these indicators, the tire is considered unsuitable for use. In addition to wear indicators, a scale is applied to the tire tread B with a range of 2–7 mm, next to which there is a groove of variable depth. As the tread wears, the groove shortens, pointing its end to the actual tread thickness.

The remaining tread height should not be less than 1.6 mm;

Safety warning(for tires on the US and Canadian market) – text on English language, explaining some of the features of safe use of the tire;

tire manufacturing date - consists of four digits, the first two indicate the week, and the last two indicate the year of manufacture (until 2000 - three digits, the last one of which is the year of manufacture);

PCT– a symbol of compliance with current safety standards established by Rosstandart;

E with a number is the code of the country that issued the certificate of conformity according to UNECE rules. Next is the identification or serial number of the tire (up to 11 numbers and letters);

Tubeless– tubeless tire design;

Tube Tire– tube tire design;

Sidewall– composition of the sidewall layer;

Rotation(arrow) – direction of rotation;

D.A.(stamp) – minor manufacturing defects that do not interfere with normal operation.

For tires with an asymmetric tread pattern, indicate the correct position of the tire on a Volkswagen Polo sedan:

Left– the tire is installed on the left side of the car;

Right– the tire is installed on the right side of the car;

Outside(Side facing outwards) – the outer side of the installation;

Inside(Side facing inwards) – inner side installations.

Often the operating conditions may be indicated on the tire, for example:

M+S(Mud + Snow) – “dirt” and “snow”;

R+W(Road + Winter) – “road” and “winter”;

Winter- "winter";

Rain- "rain";

Water or Aqua– “water”;

A.W.(Any weather) - “all-weather”.

All Season North America("all Seasons North America") and so on. – tires designed for use in specific conditions.

Some manufacturers use icons (sun, snowflake, cloud, etc.) instead of letter designations.

After purchasing a car, the time comes when you need to change the rims on a Volkswagen Polo. In addition to the technical part of the issue, this is resorted to when there is a desire to update the car and make it more attractive on the road.

But it is worth noting that it is not always possible to choose the right optimal sizes disks and their parameters. They will differ in standard and improved versions. If you don't choose the right one, problems can't be avoided.

Wheels for different versions of Volkswagen Polo

Various modifications of the Volkswagen Polo have their own sizes and characteristics. This applies not only to the specific model, but even to the year of manufacture. Manufacturers are trying to create the most favorable conditions for movement.

Thus, a liter Polo requires the installation of 13*4.0 wheels until 1994, after which 13*5.0 were installed. This made it possible to slightly reduce the disc offset from 38 to 35. This decision and the use of a certain tire size also had an impact. The rims on cars with a 1.2 engine remained virtually unchanged: 14*5.0 (6.0) or 15*6.0.

The FSI model with a 1.4-liter engine produced in 2007 requires the mandatory installation of 14*5.0 or 14*6.0 wheels. This also affects its offset and allows the use of completely different tires.

This suggests that not every Volkswagen Polo model can use the same wheel parameters. This issue should be approached with all responsibility, so as not to worry while driving on the roads.

When installing discs (casting) on ​​the Trend version, you should use 5J*14 discs, which have an offset of 35. The Comfort version provides 6J*15, which has an offset corresponding to 38 mm.

Standard wheels

In the standard version, the Volkswagen Polo sedan is equipped with “stampings” 5J-14, as well as 6J-15. In this case, 5 and 6 are the width of the rim, which is measured in inches per alloy wheels, J is the shape of the rim flange profile, and 14 and 15 are the rim diameter.

If you take a Polo in a Highline sedan body, it is marked with wheels 6J*15 ET 40 PCD 5*100. It's very important here correct location bolts, the distance between which must be maintained strictly at 100 mm. Disc offset (ET) is the distance to the plane of symmetry of the rim from its direct mounting. The unit of measurement used is millimeter. This is all provided for light alloy wheels.

The Volkswagen Polo is produced from the factory with an offset of 35 to 40 mm. In this case, the bolts are always located at a distance of 100 mm and are screwed in in the amount of 5 pieces.

The standard wheels will differ from each other in terms of bodywork. The parameters will be as follows:

• GF-6NAHW. All versions of the car produced in 2000 are equipped with wheels measuring 14*6.0 or 15*6.0. For this reason, the offset of the disk 43 and 45, respectively, will differ, which indicates the impossibility of using identical disks on different vehicles.
• ABA-9NBUD. If you take a car made in 1996, the wheels are 13*5.5 with an offset of 43. In 2007, 14*6.0 with a similar offset were installed on the car.
• GH-9NBBY. Wheel samples changed almost every year, as not only the size was adjusted from 14 to 16, but also the rim width from 6.0 to 6.5. But the offset and drilling remained unchanged.
• GH-9NBKY. In 2004-2007, the disks did not change and remained the same, namely 14 * 6.0. The only thing that is different is for the 2006 model. a rim diameter of 15 could be used, with all other identical parameters.

They use 5*100 drill bits almost everywhere. The only exception is the 2000 model GF-6NAHW body, which uses 4*100.

Engineers at the German car manufacturer do not rule out installing wheels with a diameter of R16 instead of standard ones. This is more focused on tuning and more on classic performance. But if the vehicle was purchased from a dealership, you can immediately forget about the warranty service associated with chassis. That is, only the owner should decide this. This is called an experiment attempt, for which no one bears responsibility.

Fastening bolts

The fit of the bolts used on standard wheels is spherical. They should be of the following type:

• Bolt cap for fixing the wheel – 3СО 601 173.
• Wheel security bolts included M14X1.5x27.5, 1KO 698 137A.
• WHT 001 812 is available for a single bolt of this size.

The correct bolt pattern guarantees a high-quality and long-lasting ride without consequences. You should be careful here, especially when installing non-standard wheels.

Disc selection

There is a huge range of wheels on the market that can be easily installed on a Volkswagen Polo car. They can be made of steel or casting. The dimensions are also different, which will fully depend on the car model, year of manufacture and other parameters.

Much will depend on the manufacturers, who have a slightly different approach to the process of creating wheels for cars, which affects the quality and duration of the operating period. Among them, the most popular manufacturers are:

• K&K. Most often offered original wheels of high quality. Available in classic silver color, size p15*J6 ET 40. Russian production It's also nice for the price. The cost of one disc is approximately 3,500 - 4,000 rubles.
• Alutec.
• Le Mans.
• Milan.
• Sakura.

It's all about the creators alloy wheels, which bring greater attractiveness to transport. But as mentioned earlier, you should not experiment, especially if you own a car from a showroom that is covered by warranty service. Best quality Possesses the manufacturer Wolf. But here it offers consumers even a diameter of R17 with J7.5. The price will vary between 5,000 – 6,000 rubles, depending on the place of purchase.

Cheaper options on the market are brands for the Volkswagen Polo sedan such as Akula, M33, CR-06, Kyoto, the cost of which starts from 2,500 - 3,000 rubles.

There is a purchase option for installing conventional “stampings”, the cost of which ranges from 1,000 – 1,500 rubles. Article numbers AR075, 7280T, X40028 and other options are usually used. Much depends on the diameter of the stamped disc and its other parameters, which are shown in the photo.

Non-standard disk parameters

You can do without standard disks for Volkswagen Polo 2017 There are several options for replacement, which at the same time remain perfectly replaceable. The main thing is that the original bolts match the purchase exactly. Sometimes it happens that in standard wheels they are screwed in 7-8 turns, but in new ones - only 5-6 or something else. This indicates the need to look for another option or select a landing site. Sometimes even 28mm long cone bolts will come in handy.

It is best to choose from the ranges from 5J to 7J, having a radius from R14 and up to R17. Some craftsmen try to take even larger centimeters, which can lead to damage.

If central hole disc differs from the classic 57.1 mm, special spacer rings should be used.

As for departure, in addition to the standard ET35-ET40, you can independently reach ET45.

This article will talk about Polo sedan wheels . As they say, tires are the floor of the car. But we won’t only talk about tires today. Tires and wheels, their sizes , exploitation and selection will be the topic of today's article.

Let's pay attention to the rims of the Polo sedan because their sizes are the first place to start when choosing wheels (rims and tires) for a car. The choice of disks should begin with the markings.

For example, wheels for the Polo Highline sedan are marked 6J x 15 ET 40 PCD 5 x 100 . Let's take a closer look at what each marking sign means.

Digit 6 – this is the width of the rim in inches
J – means the shape of the rim flange profile
15 – wheel rim diameter in inches
ET (disc offset) is the distance from the disc mounting plane to the rim symmetry plane, expressed in millimeters.
PCD 5 x 100 – bolt arrangement (5 bolts at a distance of 100 mm)

Wheel sizes for Polo sedan

1. 5J x 14 ET 35 PCD 5 x 100
2. 6J x 15 ET 38 PCD 5 x 100
3. 6J x 15 ET 40 PCD 5 x 100

We've chosen the wheels, all that's left is to choose the tires. Now let’s take the dimensions of Polo sedan tires and look at their markings using the example of tires for the same Highline. So, for the Polo sedan in the Highline configuration, tires with the following markings are suitable 195/55 R15 85T

195 is the width of the tire section in millimeters.
55 — tire profile height (percentage of width)
R – tires with radial design
15 - means the diameter of the wheel rim
85 — maximum load per wheel at maximum speed is 515 kg.
T – maximum speed driving on these tires 190 km/h

Tire sizes Polo sedan

1. 175/70 R14 84T
2. 185/60 R15 84T
3. 195/55 R15 85T
You can experiment with options for selecting disks and wheels, but the manufacturer does not recommend installing 185/60 tires on 15-radius wheels in winter. But the final choice of tire size for your Polo sedan is yours.