Audi a6 c5 what kind of engine oil. Recommended engine oil for Audi A6. What oil to fill in the Audi A6 C5 engine

Oil change in the Audi A6 C6 is done once a year or after every 15,000 km... It is worth noting that car row Audi A6 C6 series is represented by many models with different displacement and engine modifications, which affects the oil change in them.

We will consider an example of an Audi A6 C6 with a 2.0 diesel engine.

The engine oil must meet the specifications stated in the Audi service book.

For gasoline engines the oil specification VW 50101, VW 50200, VW 50400, VW 50501 has been established. VW 50700 oil is used for diesel engines. Only as an exception, VW 50600 / VW 50601 or VW 50500 / VW 50501 oils can be used.

Mixing of oil with other types of oils is not allowed.

In some cases, when the oil level drops to a critical one, you can add another oil (but not more than 0.5 liters) corresponding to the VW 50600 / VW 50601 or VW 50500 / VW 50501 specifications.

A6 owners prefer to fill in such oil:

Mobil1 5W30;
Total Quartz Ineo Long Life 5W30;
Motul 8100 X-Cess 5W40;
Castrol Edge 5W30.

The viscosity of the oil may vary slightly depending on operating conditions and climatic conditions.

It should be noted that, depending on the driving style and operating conditions, oil consumption can be up to 0.5 liters. for 1000 km. The oil consumption may exceed this value for the first 5000 km. It is recommended that the engine oil level be checked every long journey.

If the oil level falls below the permissible value, the oil level symbol "Bitte Ölstand prüfen" lights up (please check the oil level). When the oil level indicator light comes on, add oil.

When measuring the oil level, the vehicle must be on a level, horizontal surface. After turning off the engine, allow time for the oil to drain into the sump.

The oil level must never exceed the upper permissible value of the mark on the dipstick. If this happens, the oil will be released into the atmosphere through the crankcase ventilation and exhaust system. Also, oil will burn in the catalyst, which can damage it.

How many liters of oil to pour?

2.0 TFSI engine - 4.0L;
2.4 MPI engine - 6.4L;
Engine 2.7 - 7L;
2.8 FSI engine - 6.3L;
3.0 TFSI engine - 6.6L;
3.0 TDI engine - 6.4L;
3.2 FSI engine - 6.6L;
Engine 4.2 - 7.5L;

When changing or topping up oil, do not allow oil to come into contact with hot engine- fire hazard.

To work on changing the oil you will need: 32mm wrench (socket for the oil filter cup), 19mm wrench for the drain bolt, screwdriver, new oil filter, new seal ring for the oil filter box, container for draining the used oil.

After warming up the engine (15-20 minutes), we find the oil filter cover.

Using a wrench and a 32 mm socket for the oil filter cup, unscrew the oil filter.

The oil drain plug is located in an accessible place at the bottom of the engine just behind the bumper of the car.

We unscrew the bolt for draining the oil from the engine, after placing the container into which the old oil will flow out.

We are waiting for the oil to drain from the engine.

To avoid "annoying situations", screw the plug back!

Let's go back to our filter. Take a paper towel or rag and simply take it out of the nest. Extreme caution! Do not allow oil to get on the engine, because the engine is still hot and could ignite it.

Separate the filter cover from the filter itself.

The business class car Audi A6 appeared in 1994 as a replacement for the Audi 100 (C4). The fourth generation of the model is currently being produced. The A6 is available in sedan and station wagon versions, with front or permanent four-wheel drive... Depending on the year of manufacture, the model was equipped with gasoline atmospheric and turbocharged engines of various configurations (in-line 4- and 5-cylinder, V6, V8) with a volume of 1.8 - 4.2 liters or diesel engines TDI 1.9 - 3.0 liters. The sports cars of the S6 and RS6 modifications were equipped with V8 and V10 engines with an output of up to 579 hp.

What kind of oil to fill in the Audi A6 engine depends on its modification and the age of the car.

TOTAL QUARTZ 9000 5W40

Universal oil TOTAL QUARTZ 9000 5W40, which meets quality standards ACEA A3 / B4 and API SN / CF, is recommended by Total specialists as an engine oil for Audi A6 with gasoline and diesel engines(without post-treatment particulate filter), which require VW 502.00 / 505.00 approvals. It is created using synthetic technology and guarantees a high degree of engine protection against wear and harmful deposits in difficult operating conditions, such as city driving or sports driving, as well as easy cold starts. Thermal and oxidation stability of TOTAL QUARTZ 9000 5W40 retains its characteristics even after high mileage between replacements. TOTAL experts advise using this oil in the Audi A6 with TFSI engines equipped with direct injection and turbocharging.

TOTAL QUARTZ INEO LONG LIFE 5W30

When changing the oil in the Audi A6 of those modifications that need lubricants VW 504.00 / 507.00 standards, it is recommended to use a new generation engine oil TOTAL QUARTZ INEO LONG LONG LIFE 5W30. Its special composition with a reduced content of phosphorus, sulfur and metal compounds optimizes the operation of modern exhaust cleaning systems, prevents clogging and prolongs their service life, which allows this oil to be used in Audi A6 engines of Euro 5 environmental standards, including those equipped particulate filter(DPF). The antiwear and cleaning properties of TOTAL QUARTZ INEO LONG LIFE 5W30 provide reliable engine protection in all driving modes and weather conditions, and the oxidation resistance allows this oil to be used in the Audi A6 with extended drain intervals (in accordance with the recommendations of the automaker).

TOTAL QUARTZ 9000 ENERGY 0W30

TOTAL QUARTZ 9000 ENERGY 0W30 oil produced using synthetic technology complies with VW 502.00 / 505.00 standards and can be used as an engine oil for Audi A6, which requires this level of performance. It protects engine parts from wear and deposits in difficult driving conditions for a long time due to excellent operational characteristics and exceptional antioxidant properties. Due to the increased fluidity of the oil for the Audi A6 TOTAL QUARTZ 9000 ENERGY 0W30, it guarantees a cold start even at extremely low ambient temperatures (oil pour point -45 degrees).

The Audi A6 is the reborn Audi 100 in 1994. The first version of the A6 was conceived as a restyling, but eventually changed to a different name. lineup... Next, we will figure out how to change (and which ones are suitable for the 2.4 engine) engine oil.

The manufacturer recommends servicing every 15,000 km for gasoline and 10,000 km for diesel units. In practice, the owners are trying to serve already at 8-10 thousand. This choice is associated with the condition of the road surface and the quality of lubricants on the market.

What kind of oil to pour and how much?

A6 owners flood mostly synthetic oils with a viscosity of 5W-30 and 5W-40. A viscosity of 10W-40 is poured into a diesel engine (it is necessary with a note on the package that the product is suitable for diesel engines)

The choice and purchase of a particular brand / company is not fundamental, you can take any popular and not expensive oil from the store. As an option, we give a small part of the common ones:

Motul 5w30;
LazerWay LL 5W-30;
Castrol 5W40;
Mobil 5w40;
Total Quartz 5w-40;
Liquid Molly 5W40;

Which viscosity should you choose?

The choice of a specific viscosity should depend on the temperature conditions of your region. The chart below will help you determine the "correct" viscosity for your region.

Temperature working range	Viscosity
from -35 to +20	0W-30
from -35 to +35	0W-40
from -25 to +20	5W-30
from -25 to +35	5W-40
from -20 to +30	10W-30
from -20 to +35	10W-40
from -15 to +45	15W-40
from -10 to +45	20W-40
from -5 to +45	SAE 30

In addition to the oil, the cleaning filter also needs to be changed, for each engine there may be “own” filter models, so it is not reasonable to give specific examples of suitable models here.

2.4 liter engine options

2.4 (136 HP, 100 KW) (ALW, ARN, ASM);
2.4 (156 HP, 115 KW) (APC);
2.4 (163 HP, 120 KW) (AJG, APZ, AMM);
2.4 (165 HP, 121 KW) (ALF, AGA, ARJ, APS, AML);
2.4 quattro (163 HP, 120 KW) (AJG, APZ);
2.4 quattro (165 HP, 121 KW) (ALF, AGA, APS, ARJ, AML);

When buying, inform the seller about your complete set of the engine so that he can choose the right filter (or filter element) for you exactly.

Instructions

We warm the engine up to 45-50 degrees. Warm oil has better fluidity and will drain better from the engine when completely changed. Our task is to remove to the maximum the old dirty and waste fluid that no longer has useful properties from the engine and fill in a new one. If a lot of old dirty oil remains in the crankcase, it is swept away with a new one and will worsen its useful properties. Warm up the engine for 5-7 minutes before operation, this will wake up enough.
For easy access to the drain plug (and in some models, the oil filter is also attached from the bottom) and the bottom of the car as a whole, you need to jack up or drive into the inspection pit ( the best way). Also, in some models the "protection" of the engine crankcase can be installed.
We open air access to the crankcase by unscrewing the filler cap and the dipstick.
Substitutes a large container (equal to the amount of oil to be poured).
We unscrew the drain plug with a key. Sometimes the drain plug is made as a usual "bolt" for an open-end wrench, and sometimes it can be unscrewed using a four or a hexagon. Do not forget to wear protective gloves, the oil will most likely wake you up warm, but you need to be careful.
We are waiting for about 10-15 minutes until the mining drains into a bowl or a cut plastic canister.
Optional but very effective! Flushing the engine special liquid is not included in the service schedule and is not mandatory - but. Having a little confusion, you will at times better flush the engine from the old, black oil. At the same time, flushing is performed with the old oil filter within 5-10 minutes. You will be surprised what kind of black oil will pour out with this liquid. This liquid is very easy to use. A detailed description should appear on the flushing fluid label.
We change the sedum filter. In some models, it is not the filter itself and the filter element (usually yellow) that are replaced. Impregnation of the filter with new oil before installation is mandatory. Lack of oil in a new filter before starting the engine can cause oil starvation, which in turn can deform the filter. In general, this is not a good thing. Remember to also lubricate the rubber o-ring before installation.
Fill in new oil. After making sure that the drain plug is screwed in and installed new filter oil cleaning, we can proceed to filling new oil guided by the dipstick. The level should be between the minimum and maximum mark. Also, you need to remember that after the first start of the engine, a little oil will go away and the level will drop.
In the future, when the engine is running, the oil level will probably change, be careful during the first few days of operation. Recheck the oil level on the dipstick after the first start.

Video materials

In the video, a specialist changes the engine oil step by step on an Audi A6 with a 2.4 liter engine.