Table for knitting machine comfort drawing. Chest of drawers for knitting machine. with your own hands. How to properly assemble a table for a knitting machine

Table for a knitting machine: how to create convenience and comfort in work

Inspired by the desire to start knitting masterpieces using a machine, you should take care of all the details of the process. There are no trifles here - one of the most important roles is played by knitting machine table. There are mandatory requirements that should be considered when purchasing or self-production similar design.

Table for a knitting machine: furniture features

Not every type of table is suitable for installing such a device on it. In addition to the fact that such an acquisition should become an element of the interior of the room, it also simply must be functional. And just this requirement corresponds to compliance with the following points:

must be made of quality materials and fittings.
Its design should include a retractable unit, the latter being securely fixed and designed in such a way that the unit can be installed in its working position in literally a matter of seconds.
On such furniture you can work on both single- and double-frame models.
The yarn must be fed through a special hole in the shelf, from bottom to top. This will allow better control of the thread coming off.
Bobbins of thread are usually installed on a hinged lid.
It would be best to place the winder on a hinged lid.
It is very good if the design has a sufficiently large number of roll-out drawers and an additional number of shelves - the necessary devices can be placed in all these compartments.

So, the main thing that a person should experience when sitting down knitting machine table- this is convenience. Furniture should become a continuation of the device, and not just an interior decoration. It lives up to its name table for knitting machine "Comfort"- You can watch the video about it below. And during production homemade version The chest of drawers must be guided by this rule.

DIY knitting machine table

To be one hundred percent sure that the result will be useful and functional furniture, you need to be fully armed when creating a project such as " DIY knitting machine table". Drawings are the first thing we recommend starting with. You can draw them manually, but it would be more correct and professional to do this in specialized programs like AutoCad, 3d max or Compass-3D. It is important to set the necessary parameters after measuring and you can send the file for cutting. If we talk about the material used, it can be MDF panels or laminated chipboard.

Your own version is convenient with the following advantages:

creating a table specifically for the parameters of your machine (and not some universal ones);
the height of the working surface can be adjusted to suit your height;
such furniture will have an original and unique design.

There are some common options that may have knitting machine table. In this case, the drawing should contain the following information:

reflect the dimensions of the entire structure - 1200x420x940 mm;
shelf size for the unit itself is 1155x220 mm;
distance from shelf to floor - 700 mm.

Successful examples are shown here drawings of a table for a knitting machine.

DIY knitting machine table: stages of creation

If you go all the way in creating your own functional furniture, then the entire work process will be built according to the following algorithm:

After the drawing comes cutting. It is done either in production or at home using a jigsaw. However, the latter option is not very successful - it does not make it possible to work with three-meter panels. And the edges of the parts may not be very smooth.
To make the table look professional and neat, its edges need to be finished. For edging, it is best to use special thermal tapes, but a regular iron can help. In production it will be replaced by a special machine.
Equally important is the preparation of fittings for connecting the table - for this purpose, furniture ties, secret latches, and roll-out guides are purchased. It is best to order such work immediately at the factory because very often when doing it yourself there is a chance that the veneer will be damaged.
The final stage will be assembly. It is produced according to the existing drawing. This option will work if all the parts and holes were well prepared in advance (after all, in most cases it is impossible to remake them - you will have to order cutting again).

Table for knitting machine "Silver": production in practice

So, it is possible to make furniture from scratch, but certain difficulties may always arise. For example, even after seemingly ideal drawings, for example, table for knitting machine "Silver" improvements will be needed. In practice, it may turn out that the sheet of source material will be thicker or, conversely, than what is already planned.

So, let's look at a new product - a table for a knitting machine of the COMFORT series:

The table is made of high-quality materials and fittings, has an original design that will fit into any interior and will not take up much space in your room.

The design of the retractable unit and its fixation will allow you to literally install the machine in a working position in a few seconds.

You can work on one or two fountains.

The yarn is fed from the bottom up, through a special hole in the shelf. This system allows for better thread shedding and also eliminates the need to remove and/or change bobbins after completing the knitting process. At the same time, you can install bobbins on the hinged lid.

It is very convenient to place the winder on the hinged lid.

On the middle shelf there are reels and accessories, and thanks to the roll-out system of the bottom drawer,

You will always have convenient access to any accessory.

Plastic containers will hold needles, weights, punch cards and other useful knitting tools.

It's no secret that comfort while working at a knitting machine can only be achieved if all oscillations and vibrations during carriage movement are completely eliminated. Therefore, we did not use traditional wheels in the table, but installed it on height-adjustable supports.
Also, the table for the COMFORT series knitting machine uses a system for extending and fixing the machine, which allows you to securely fix the machine during operation.
Extension occurs along reinforced guides that can withstand loads of up to 200 kg,
,
and fixation occurs across the entire width using a fixing panel, which is located on the back side of the pull-out shelf.

The guaranteed service life established by our company for the extension mechanism is 10 years.

Dimensions table (mm): width depth height
1200 420 940

Knitting machine shelf size: 1155x 220

Distance from shelf to floor:

Chest of drawers for knitting machine

I saw enough of the dresser tables on the Internet and showed them to my husband. So he decided to pamper me. After all, the machine is now in the hall... With such a table, you can hide it for the time when you are not knitting or expecting guests.
In our city, you can now order sawing and finishing of laminated chipboard edges directly at the building materials store. They do it quickly, and we are satisfied with the quality.
The table is almost ready!

The part number on the layout matches the part number on the list.
The shelf is supported on guides like these Full extension ball guides with closer.
They pull out the shelf very far, Sergei shortened (sawed off) one of the parts so that the machine would not overweight the table) When we install the machine and try to knit on the new table, I will write whether it is convenient or not..
In total, the table cost us 5 thousand rubles and kopecks. Significant savings on the family budget)
You can compare with prices in online stores and, but you also need to add delivery, and from Moscow to Altai will not be cheap at all.

Photos of table for knitting machine:

Assembled length: 1290 mm, Height: 875 mm, Depth: 490 mm

The table is delivered unassembled and occupies three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations are performed during assembly, minimal experience is still required.
Tools required for assembly:

Hammer
Screwdriver and drill bit 2mm
Phillips screwdriver medium (PZ3)
Slotted screwdriver small (0.5x3)
Medium slotted screwdriver (0.8x4)
7mm wrench (or pliers)

If you've never assembled furniture before or don't have necessary tools, invite a specialist assembler.

Tables in these colors are now available for order:

The shelf for fastening the knitting machine is located at a height of about 70 cm from the floor, extends 20 cm and is rigidly fixed in the extended position. At the same time, the canvas hangs freely, the knees do not rest, it is comfortable to sit and the carriages can be removed without touching the walls of the table.

Behind the pull-out shelf there is space for storing accessories - weights, combs, etc.

The table rests on four rubberized wheels, which makes it easy to move if necessary. The front wheels are equipped with a stopper that blocks not only the rotation of the wheel, but also the rotation of the wheel module around the axis.

The top shelf can easily accommodate a laptop with a screen diagonal of 14-15"

The doors of the chest of drawers can be easily opened even during work, when the canvas and weights are hung on the needles.

Behind the pull-out shelf you can easily place bobbins or skeins of yarn. After extension, more than 20 cm of free space remains behind the shelf, and the yarn is fed onto the thread guide completely freely.

You can interrupt your work at any time. It is enough to remove the thread guide, the font shift handle and fold the handle of the upper carriage. After this, you can slide the shelf with the knitting machine into place, fold the product on the shelf in front of the machine, and put the bobbins in the middle or lower drawer.

Egger.
Smooth handles were chosen for the doors, to which yarn does not cling.

So, let's look at a new product - a table for a knitting machine of the COMFORT series:

The table is made of high-quality materials and fittings, has an original design that will fit into any interior and will not take up much space in your room.

The design of the retractable unit and its fixation will allow you to literally install the machine in a working position in a few seconds.

You can work on one or two fountains.

It is very convenient to place the winder on the hinged lid.

On the middle shelf there are reels and accessories, and thanks to the roll-out system of the bottom drawer,

You will always have convenient access to any accessory.

Plastic containers will house needles, weights, punch cards and other useful knitting tools.

Overall dimensions of the table (mm): width depth height
1200 420 940

Knitting machine shelf size: 1155x 220

Distance from shelf to floor:

Chest of drawers for knitting machine

I saw enough of the dresser tables on the Internet and showed them to my husband. So he decided to pamper me. After all, the machine is now in the hall... With such a table, you can hide it for the time when you are not knitting or expecting guests.
In our city, you can now order sawing and trimming of chipboard edges directly from the building materials store. They do it quickly, and we are satisfied with the quality.
The table is almost ready!

Our table was born in pain, there were a lot of measurements, we looked at photographs of the happy owners of factory tables, we argued about the height of the table, the height and width of the retractable shelf-tabletop. I will share the drawings of our table. I mostly knit while standing, I sit down when I do a big decker, lift the loops, etc. It's convenient for me. Well, additional gymnastics)))
I warn you right away, the drawings are rough, the dimensions on them are approximate. The final dimensions of the parts can be viewed on the scan from the layout sheets. There are also two lines under the dimensions: they indicate how the ends are processed with a thin PVC edge of 0.5x19 mm (dashed line) or a PVC edge of 2x19 mm (solid line). Well, they ordered another extra shelf, they miscalculated, I crossed it out on the layout.

The part number on the layout matches the part number on the list.
The shelf is supported on guides like these Full extension ball guides with closer.
They pull out the shelf very far, Sergei shortened (sawed off) one of the parts so that the machine would not overweight the table) When we install the machine and try to knit on the new table, I will write whether it is convenient or not..
In total, the table cost us 5 thousand rubles and kopecks. Significant savings on the family budget)
You can compare with prices in online stores and, but you also need to add delivery, and from Moscow to Altai it will not be cheap at all.

Photos of table for knitting machine:

Assembled length: 1290 mm, Height: 875 mm, Depth: 490 mm

The table is delivered unassembled and occupies three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations are performed during assembly, minimal experience is still required.
Tools required for assembly:

Hammer
Screwdriver and drill bit 2mm
Phillips screwdriver medium (PZ3)
Slotted screwdriver small (0.5x3)
Medium slotted screwdriver (0.8x4)
7mm wrench (or pliers)

If you've never assembled furniture before or don't have the necessary tools, hire a professional assembler.

Tables in these colors are now available for order:

Wenge Mali

Wenge Mali
+ Woodline cream

Cherry Victoria

Honey maple

French walnut

The cabinet tables are made of high-quality material from the German company Egger.
Smooth handles were chosen for the doors, to which yarn does not cling.

The part number on the layout matches the part number on the list.
The shelf is supported on guides like these Full extension ball guides with closer.

They pull out the shelf very far, Sergei shortened (sawed off) one of the parts so that the machine would not overweight the table) When we install the machine and try to knit on the new table, I will write whether it is convenient or not.
In total, the table cost us 5 thousand rubles and kopecks. Significant savings on the family budget)
Can be compared with prices in online stores

Chest of drawers for knitting machine

From the author: “I saw enough of dresser tables on the Internet, showed them to my husband. So he decided to pamper me. After all, the machine is in the living room now... With such a table, you can hide it for the time when you are not knitting or expecting guests.
In our city, you can now order sawing and finishing of laminated chipboard edges directly at the building materials store. They do it quickly, and we are satisfied with the quality.
The table is almost ready!

http://volga64.blogspot.ru/2011/07/blog-post_4761....101972897#c7227987934543472638

Photos of table for knitting machine: