What kind of oil to fill in ford focus 2 1.6. Ford engine oil. What to do if there is no way to measure the volume

The second generation Ford Focus is one of the most common budget cars in Russia. Despite the fact that the second generation has not been produced for a long time, these models are still often found on city streets. The car has proven itself on the good side. This is a reliable and economical car for every day. But so that its operation does not become a burden, it is necessary to carry out regular maintenance. One of these operations is an oil change at the Ford Focus 2. But replacement is only half the battle. In order for the engine to last for a long time, you need to know which oil is suitable for a particular power unit. Well, let's figure out which oil is best for the 2nd generation Ford Focus.

What is poured from the factory?

On the conveyor "Focus" came with semi-synthetic oil, which corresponded to the Ford approval WSS-M2С913-A. As for the brand, it was a Formula F product with a viscosity of 5w30.

This oil had a whole range of additives that are so necessary when running in a new power unit. But time does not stand still, and now the second "Focuses" are no longer produced. So what oil for Ford Focus 2 (1.8) will be the best? There are plenty of options.

Motorcraft Full Synthetic (USA)

Note to owners of diesel Focuses: Motorcraft Full Synthetic is suitable only for gasoline engines.

As for viscosity, it is the same - 5w30. With these characteristics, the product does not thicken much in frost and feels great in the summer. This oil is suitable for both southern and middle regions. But for those whose winter lasts more than four months, it is recommended to switch to 0w30. This is a thinner oil that will make cold starts less difficult.

Castrol

This is already a European brand. All French cars drive on this oil, and it is not contraindicated for Focus either. Judging by the reviews, Castrol products are of high quality and detergent properties. This is especially noticeable on engines with mileage over 200 thousand. The product perfectly washes away all the dirt and accumulated deposits. Among the shortcomings, reviews note a higher cost. The price of the product is 5.5 thousand for five liters. American "Motorcraft" is 30 percent cheaper. Also, Motorcraft makes fewer fakes.

But the counterfeit "Castrol" in the domestic market is more than enough - motorists say. When buying, you need to carefully look at the inscriptions and do not buy canisters with incorrect fonts and crooked measuring lines. What kind of oil for Ford Focus 2nd generation to pour? If we consider the Castrol line, then experts recommend using the Edge line with a viscosity of 5w40. This is pure synthetic, but there are also semi-synthetics. This is Castrol Magnatec 5w30. As practice shows, it is no worse than the previous one - it also washes away dirt and does not thicken in winter.

Other options

Are there any analogues? There are a lot of them, but most use the following products:

Motul 913s. This is a semi-synthetic product with a viscosity of 5w30. One of the cheapest on the list. The cost of a five-liter canister is 2.5 thousand rubles.
Shell. One of its advantages is that the oil is suitable for any season. With him, the car feels great both in winter and in summer.
JB German Oil LL Special. This is synthetic oil. Sold in 4 liter cans. The cost is from 2.5 to 3 thousand rubles. There are options for both petrol and diesel engines.

How much to pour?

Along with the choice of brand, motorists are wondering the amount of lubricant. Since different engines were installed on the Focus, the volume of the product being poured will be different. Let's start with the smallest motors. These are 16-valve units 1.4 with gasoline injection. For them, it is recommended to use 3.75 liters of oil. The same figure for 1.6-liter diesel engines. But gasoline 1.6-liter Duratek units need more oil. Replacement will require 4.1 liters of product. The 1.8 engine is designed for 4.25 liters. For two-liter gasoline-powered engines, it is recommended to use 4.3 liters of oil. But in a 2.0 turbodiesel engine, it is worth pouring 5.5 liters already.

What to do if there is no way to measure the volume?

If oil is poured directly from the barrel, you can determine the rate by the dipstick.

Experts say that the level should be average or higher than that. But it is worth remembering that a lot of oil is just as harmful to the engine as its absence. You have to follow certain rules.

About transmission

Along with the engine, do not forget about the transmission. This is an equally important unit after the internal combustion engine. The Ford Focus of the second generation was equipped with both mechanical and automatic transmissions. Let's start with the first. At the manual transmission, the Ford Focus 2 oil change should be done every 75-90 thousand kilometers. No more than 2.2 liters of oil are poured into the box (although the total volume indicated by the manufacturer is 2.8 liters). As for viscosity, the 75w90 product is usually chosen. Manufacturers may vary. The most popular is "Mobile Mobilub 1". Despite the high viscosity, this product performed well in the northern regions. Owners in the reviews do not complain about the operation of the transmission - it does not need additional heating. The cost of the product is 800 rubles per liter, which is quite acceptable. Motorists also use Castrol. However, it costs more - from 1.2 thousand rubles per liter. These two brands are identical in quality, so there is no point in overpaying for a brand.

What other oil can be poured into the Ford Focus 2 box? For those who want to save more, without sacrificing quality, experts advise considering Eneos Gear 75w90. However, reviews say that the product is afraid of frost. It should only be used in temperate climates, otherwise the box may be damaged. The boundary operating threshold for Enios Gear is minus 20 degrees. What people love this oil for is its price. One liter costs 375 rubles.

Changing the oil in the automatic transmission on the Ford Focus 2

An automatic transmission has a completely different principle of operation, so the oil here differs in both viscosity and technical characteristics. Instead, ATP fluid is used here. It can be recognized by its characteristic red color. Which product should you choose? Experts advise using the original Mercon V oil. How many liters will be needed? It all depends on the replacement method:

With a partial oil change method in the Ford Focus 2 automatic transmission, it will take about five liters of fluid. Usually this method is used by those who service the car with their own hands.
If hardware is used (that is, a complete replacement), you must have at least ten liters.

The cost of the procedure, taking into account work and materials, is 12 thousand rubles. During hardware replacement, specialists dismantle the pallet, clean the filters and the magnet, as well as lubricate the fittings. The pallet is installed back on the sealant (the old one is previously removed with a knife).

Upon completion of the operation, a jump in idle speed is possible. But after two or three minutes everything stabilizes - this is normal. In terms of time, hardware replacement takes no more than half an hour. And with a partial replacement, you can suffer for about three hours. Plus, after a thousand kilometers, you will again have to break the pan and drain the oil. With a hardware replacement, the next service will be required only after 60 thousand kilometers. It is this figure that is the regulation for replacing ATP fluid in the Focus automatic transmission.

So, we found out which oil to choose for Ford Focus 2 in the engine and gearbox.

The regulations for replacing engine oils for the second generation Ford Focus, as a rule, are being revised in the direction of reducing mileage. Therefore, the optimal period between lubricant changes in the motor will be 7-8 thousand km . What kind of oil is better to fill in the Ford Focus engine and how much, does it make sense to look for official Ford oil, let's figure it out right now.

What oil is filled in Ford Focus 2 at the factory

Mileage over 150,000 km. There is practically no oil consumption, within normal limits. Lem Castrol.

All Ford Focus cars after 2009 come off the assembly line with a semi-synthetic called Ford Formula F 5W-30 in the engine. This oil complies with Ford WSS-M2C913-A and Ford WSS-M2C913-B approvals.

Conveyor oil is produced by the French corporation Elf, while the manufacturer does not recommend changing the lubricant in the engine until the first scheduled maintenance. This is explained special characteristics of semi-synthetic oil , which contributes to high-quality running-in of the engine.

Fake Ford Formula F 5W-30

A fake is distinguished by unclear text and a dimensional structure on the side of the container.

D0 2009

original oil.

For engines assembled before 2009, when replacing the old lubricant with Ford Formula F 5W-30, there is no need to use any special flushes and other fluids, the replacement technology also does not change for topping up old engines with Ford Formula E 5W-30 oil new Formula F oil can be used.

Actually quite it is not necessary to use Ford Formula F 5W-30. It is quite enough that the selected oil meets the Ford WSS-M2C913-A and WSS-M2C913-B standards, especially since, for obvious reasons, Ford does not produce any oils and uses third-party products.

What oil is better to fill in a Ford Focus 2 engine

If there is no desire to experiment with the semi-synthetics recommended by Ford, you can safely try pouring oil from the American manufacturer Motorcraft full synthetic 5W-30 S API SN.

It is a high quality synthetic product that has Ford approvals . At the same time, the price of this oil is one and a half times lower than the promoted European brands.

How much to pour?

Filling volumes of oil.

For a two-liter Ford Focus engine, at least 4.5 liters will be needed.

Analogues

PETRO CANADA 5W-30.

Of the European brands, Castrol Edge 5W-40 Fully Synthetic, Castrol Magnatec 5w-30 are often used, but they are significantly more expensive. There are also more budget series - Motul 5w-30 913C. They ask for 2.5 thousand for 5 liters.

Specifications

By following the specifications, you can maximize the life of the engine.

In a word, the main indicators of the applicability of motor oils for the second generation Ford Focu remain:

factory specifications Ford WSS-M2C913-A and Ford WSS-M2C913-B , which should be indicated on the sticker, or simply a recommendation from Ford;

depending on climatic conditions, oils with viscosity characteristics according to SAE 5W-30 and 5W-40 .

Oil filter

Sectional view of Bosch oil filter 0 986 452 044. Made with quality.

When changing the lubricant, it will be necessary to replace the oil filter.

For 1.4 and 1.6 liter engines, a branded Ford filter will have a catalog number 1714387-1883037, but in addition to it, you can use analogues from Suzuki with a catalog number 16510-61AR0, Bosch filters 0 986 452 019, Bosch 0 986 452 044, Fram PH3614, as well as German filters Mann W 610/1 enjoy a good reputation.

conclusions

Therefore, for any Ford Focus engines, we use oil of any manufacturer we like with Ford approvals and the SAE viscosity characteristics indicated above. Good luck to everyone and a great resource of the motor!

Being serviced by an authorized dealer, owners rarely show interest in the type and other characteristics of such an important operating fluid as oil. Therefore, after the warranty has expired, the question arises of choosing the right lubricant for the engine.

Ford Motor Company engine oil acceptable for safe operation has long been analyzed. However, the company has officially formalized its requirements for engine lubricating fluid, announcing branded tolerances.

The technical manual for any modern FORD model reflects the acceptability of using a lubricant exclusively on a synthetic basis. Until recently, only 5W-30 synthetics were approved for use according to the SAE standard.

Work on a new line of turbocharged engines called EcoBoost, with impressive, incredibly high power and low consumption, was associated with the search for a new oil for them. The result - a fashionable energy-saving alternative: 5W-20 synthetics, which has a low high-temperature viscosity, which entails:

easy start;
fuel economy;
increased wear resistance of engine parts during winter operation.

Approved engine oil for Ford vehicles: official specifications

Not everyone can pour priority synthetics 5W-20 or already transferred to the category of alternative 5W-30. The sticker on the canister of the 5W-30 class must necessarily contain information about compliance with the now slightly outdated Ford specification, namely one of the tolerances:

WSS-M2C913-A;
WSS-M2C913-B;
WSS-M2C913-C%;

Ford's latest requirements for 5W-20 synthetic engine oil are reflected in the new WSS-M2C948-B approval. This specification is relevant only for gasoline engines. The manufacturer advises to fill diesel units with the same chemistry 5W-30, but meeting the latest requirements of WSS-M2С913-D.

In emergency situations, there is only one recipe - to use compounds that meet the ACEA A5 / B5 class. And this is a lubricant calculated:

for use in conditions of extended drain intervals;
for use in forced copies operating on high-octane or diesel fuels;
for long-term thermal and oxidative resistance;
to reduce friction and fuel consumption.

Joint samples

The owner, who carefully examines the company manual for the car, probably noticed the Castrol company logos and recommendations for using its products in the technical sections. Ford and Castrol have been working together for a long time to develop optimal oils for Ford engines.

professional Castrol Magnatec E 5W-20, associated with high-octane fuel;
professional Castrol Magnatec A5 5W-30, indicated for use in solid fuels.

A series of official experiments confirmed the advantage of using Castrol Magnatec Professional 5W-20 compared to the previous generation 5W-30 (WSS-M2C913-C approval). The new Castrol Ford engine oil plays into the hands of fuel savings, expressed as a percentage:

1.1% - in the bustle of the city;
1.2% - on the freeway;
1.5% - on a traditional suburban highway.

It is possible to purchase a jointly developed lubricant only in the official dealer network. The well-known series of Ford Formula F and S/SD synthetic oils is no longer available in authorized centers - it is sold in a regular retail network.

Alternative Options

The original series of Ford Castrol microfiltered greases, the consistency of which is green, is opposed by products from many well-known companies. An alternative to the new 5W-20 synthetics can be:

Liqui Moly Special Tec F Eco;
Rowe Hightec Synt HC Eco-Fo;
Kuttenkeuler Driver Special Eco-F;
Motul Specific;
Total Quartz 9000 Future EcoB;
Q8 Formula Exclusive Eco;
Wunsch Syntholube F1E;
Kroon Oil Duranza Eco.

Competing with a synthetic composition for 5W-30 diesel engines are:

Shell Helix Ultra Professional AF;
Motul Specific 913 D;
Liqui Moly Special Tec F;
Mobil Super 3000 X1 Formula FE;
Eurol Fortence;
Q8 Formula Techno FE Plus;
Kroon Oil Duranza LSP.

What is the result

Current Ford approvals are WSS-M2C948-B (for petrol engines) and WSS-M2C913-D (for diesel models). The alternative specification is WSS-M2C913-C. In emergency situations, the use of a "long-playing" oil that complies with the ACEA A5 / B5 class is allowed.
In Ford cars, the plant recommends using Ford Castrol Magnatec Professional E 5W-20 (gasoline) and A5 5W-30 (diesel).
An alternative to dealer synthetics 5W-20 and 5W-40 are top products from Shell, Liqui Moly, Mobil, Rowe, Motul, Q8 Oils, Total, Kuttenkeuler, Wunsch, Kroon and others.

For 20 years, the Ford Focus has maintained its popularity, being an unpretentious and reliable car. To ensure reliable operation of its engine, it is necessary to use engine oil approved and recommended by the factory, or fill in a lubricant that has similar parameters.

Not only the operation of the power plant, but also the duration of the operation of the unit depends on the correctness of this choice. Our rating review presents the best oils from various manufacturers, the main parameters of which are optimally suited for each specific Ford Focus engine (in Russia, models with typical Endura, Zetec-E, Duratec and Eco Boost (Fox) engines are most common).

The best synthetic engine oils for Ford Focus

Synthetics have the properties necessary for high-quality lubrication of modern engines, have more reliable protection against oxidative processes and react little to high operating temperatures inside the motor. Also an important feature of this category of lubricants is a long operating period, during which all the declared characteristics of the oil are preserved.

5 LUKOIL GENESIS ARMORTECH A5B5 5W-30

Best price category
Country Russia
Average price: 1,421 rubles.
Rating (2019): 4.6

The oil is created on a high-quality synthetic base, reinforced with a whole range of highly active modern DuraMax additives, developed specifically for the line of synthetic lubricants of this brand. As a result, the products have good lubricating properties, an antioxidant effect, and do not fade even under extreme loads.

Almost none of the reviews has critical ratings of this oil. Affordable cost, economical operation of the motor, and the absence of neoplasms in the oil system are noted. Moreover, existing deposits in the motor gently and gradually dissolve, and, without precipitating, can be removed during the next lubricant change. As a result, the efficiency of the motor is increased, the level of vibration and noise during no-load operation is reduced.

4 XENUM OEM-LINE FORD 913-D 5W30

Multi-level motor wear protection
Country: Belgium
Average price: 2 888 rubles.
Rating (2019): 4.8

High quality oil, with a low content of sulfates, sulfur and phosphorus inclusions, can be poured into diesel and gasoline engines of a Ford Focus car with the appropriate approval. Provides minimal wear of friction pairs, the content of esters of carboxylic acids (esters) preserves the oil film at high temperature loads, increases the operating cycle.

The reviews note more economical operation of the motor, an excellent washing effect, starting the engine in winter, even in severe frosts, does not cause difficulties. A comprehensive selection of additives, which is part of Xenum engine oil, increases the resource of not only the internal combustion engine, but also the exhaust system.

3 MOBIL SUPER 3000 X1 FORMULA FE 5W-30

The most popular oil Best frost resistance
Country: Finland
Average price: 1,928 rubles.
Rating (2019): 4.8

All over the world, Mobil motor oils have proven themselves as high-quality and reliable products. By purchasing this lubricant for the engine of their Ford Focus, owners can get into outright falsification, the properties of which can ruin even a tractor engine. The numerous reviews are full of high ratings for the performance of Mobil Super, and only the lack of decency from some sellers spoils the big picture.

In general, the oil ensures reliable operation of the internal combustion engine at any time of the year, winter is not unusual for a product developed in Finland. It can be successfully used in the northern regions of the country, with more severe climatic conditions. In addition, the lubricant reliably protects the engine from overheating, does not form deposits and stops corrosion processes inside the engine. The complex action of this oil inevitably leads to an increase in engine life.

2 CASTROL MAGNATEC PROFESSIONAL E 5W-20

A good high-tech oil that provides a long engine life with regular timely replacements. The molecular structure of the lubricant ensures that parts are coated, especially intensifying at high energy points (points of contact between friction pairs) and preventing direct contact. Even at long intervals in engine operation, the molecular structure retains the required amount of oil on the working surfaces and provides lubrication of parts until the oil pump creates working pressure in the system.

Many owners of Ford Focus cars began to fill in this oil from the first days of operation, and in their reviews they note complete satisfaction with its properties and the high-quality operation of the motor. During use, the formation of any deposits in the engine was not noticed and there is not even a hint of their appearance.

1 FORD FORMULA F 5W30

original oil. stable viscosity
Country: England
Average price: 1,785 rubles.
Rating (2019): 4.9

Made specifically for Ford automotive products, provides optimal conditions for engine operation under any load. The basic lubricating base is obtained by the traditional hydrocracking method and, thanks to a multi-stage purification system, is not inferior in performance to synthetics obtained from gas. The surface of the parts inside the motor is covered with a strong oil film, which reduces friction, preventing premature engine wear.

In the reviews of Ford Focus owners, the stability of oil viscosity, good fluidity in severe frosts, a simultaneous increase in engine power and fuel economy are positively assessed. A set of high-quality additives ensures the stability of the oil structure - at high temperatures and prolonged loads, it does not liquefy. It also has a good washing effect, without creating any deposits in the motor.

The best semi-synthetic oils for the Ford Focus engine

Semi-synthetics is actually a synthesized oil diluted in different proportions with mineral oil. The temperature resistance of such an oil is lower than that of pure synthetics, but otherwise the lubricant does an excellent job. The use looks more preferable in engines with high wear, but it can also be poured into modern engines. It should not be forgotten that the interval between replacements in this case will be less.

4 Comma X-Flow Type F 5W-30

The best price in the category. Increases engine life
Country: England
Average price: 1,610 rubles.
Ranking (2019): England

A feature of this lubricant is the presence of an exclusive Infineum additive package, which provides an excellent washing and anti-corrosion effect. Thanks to the atomic inclusions of Ph and Zn metals, the best sliding performance was achieved, which significantly reduced the wear of parts during operation.

Ford Focus owners characterize oil as a reliable protection for the motor. The reviews note an improvement in the dynamics of the internal combustion engine, a decrease in noise during engine operation without load, and fuel economy. When operating in the northern regions, Comma X-Flow has proven itself, providing easy start-up in frosts exceeding -30 ° C.

3 MOTUL 6100 SAVE-LITE 5W20

High level of chemical stability
Country: France
Average price: 2,500 rubles.
Rating (2019): 4.8

Another Ford-recommended oil deserves to be included in our rating. There are only two drawbacks to this product - a relatively high cost and the ability to purchase its pathetic parody under the guise of Motul 6100. The latter simply obliges Ford Focus owners to be more selective when choosing a seller.

As for the cost, against the background of how the engine “rejoices” with this oil, and with each subsequent replacement it increases its resource more and more, the price looks quite justified. Low sulfate ash content, satisfactory washing and oxidizing effect prevent the grease from burning out under any load. Chemical stability at high operating temperatures of modern internal combustion engines provides unsurpassed qualities and provides reliable protection of engine components.

2 LIQUI MOLY SPECIAL TEC F 5W-30

High level of detergent properties. Extended change interval
Country: Germany
Average price: 3 675 rubles.
Rating (2019): 4.8

The oil of this brand does not need advertising - it is one of the leaders in the lubricants market, setting a high level of quality. Despite the fact that the base of this lubricant was created on a mineral basis, the technology of deep distillation (hydrocracking) made it possible to achieve a quality comparable to pure synthetics.

Special tec is approved for use in Ford vehicles. The high alkaline index of the oil (10.3) leaves no chance for corrosion and other oxidative processes inside the engine, prevents the formation of deposits and soot. There is an increased service life and stability in high-energy modern motors, which is not entirely typical for lubricants in this category.

1 FORD MOTORCRAFT SAE 5W30 SYNTHETIC BLEND

The best friction protection
Country: England
Average price: 1,729 rubles.
Rating (2019): 4.9

Premium oil is created on the purest basis, which has undergone multi-stage purification. The oil film is resistant to shear, oxidation and mechanical stress. As a result, a phenomenal reduction in friction, an increase in power and engine life. There is also a high level of detergent properties that maintain the cleanliness of the lubrication system at the level of a new motor. To some extent, all these factors also provide fuel economy.

Many owners constantly pour this oil into the Ford Focus, especially since it is designed just for the cars of this manufacturer. The lubricant has proven itself well in completely different working conditions. There are positive reviews from drivers who successfully use Ford motorcraft in northern regions, rural areas (in off-road conditions), as well as in ordinary urban conditions. Everywhere, the oil copes with loads perfectly, retains its properties throughout the entire period of operation.

The selection of lubricant is made taking into account the parameters of the motor and its technical characteristics. Poor-quality or incorrectly selected car oil leads to many negative consequences. We suggest that you familiarize yourself with the requirements for the recommended engine oil for Ford Focus.

Model year 2000

According to the requirements of the Ford Focus car manufacturer, it is preferable to use Ford or Motorcraft Formula E branded lubricants with a viscosity index of SAE 5W-30. In the absence of original motor lubricants, as an alternative, it is allowed to fill in motor oils with a viscosity index of SAE 5W-30 that meet Ford WSS-M2C913-B standards.

Viscosity is selected according to scheme 1.

Scheme 1. The dependence of the viscosity of the oil on the ambient temperature.

According to scheme 1, it is recommended to use fluids with a viscosity index SAE 5W-30. For topping up, you can use engine fluids SAE 5W-30, 5W-40 or 10W-40 corresponding to the type of oils A1 / B1 (preferred) or A3 / B3, depending on the ambient temperature. It is forbidden to use motor oils with a viscosity of 10W-40 if the air temperature is less than -20 0 С.

Zetec engines - SE 16V 1.4 l:

3.75 liters, including the oil filter;
3.5 excluding filter device.

Motors Zetec - SE 16V 1.6 L, Zetec - E 1.8 L, Zetec - E 2.0 L, Duratec ST 2.0 L:

4.25 liters, including the oil filter;
3.75 without oil filter.

Engines Duratec 8V 1.6 l:

4.2 l with oil filter;
3.7 without filter device.

Endura-TDDi/DuraTorg TDCi 1.8L motors:

5.6 l including oil filter;
5.0 l excluding filter unit.

Ford Focus Mk2 2004-2011

Model 2006 release.

According to the manual, the Ford Focus manufacturer recommends using lubricants that meet the following characteristics:

original Ford engine oil or Motorcraft Formula E;
viscosity index SAE 5W-30.
approvals WSS-M2C913-B.

It is acceptable to use alternative lubricants that meet the requirements of WSS-M2C913-B and have a viscosity of 5W-30.

The owner's manual also contains the following information:

It is forbidden to fill in oils with a viscosity index SAE 10W-40 if the ambient temperature is below -20 0 С.
In the absence of motor oils that meet the requirements of WSS-M2C913-B, it is recommended to use motor oils with a viscosity of SAE 5W-30. If it is not possible to purchase recommended lubricants, you can fill in fluids with a viscosity of 5W-40 (except for machines using Flexfuel fuel) or 10W-40, which, according to ACEA standards, correspond to the A1 / B1 or A3 / B3 oil class. Preferably use A1/B1.

The amount of lubricant required when replacing is:

Equipment 1.4 L Duratec-16V:

3.8 liters with an oil filter;
3.5 l excluding filter unit.

Equipment 1.6 L Duratec-16V:

4.1 l with an oil filter;
3.75 l excluding filter device.

Ford Focus Mk3 2011-2017 release

Model 2015 release.

From the car manual, the recommended engine oil for the Ford Focus is determined by the type of engine. For gasoline engines, it is recommended to use Ford or Castrol 5W-20 viscosity engine oils that meet the requirements of WSS-M2C948-B. As an alternative lubricant, in addition to 1.0 L Eco Boost (Fox) engines, you can pour motor oils with a viscosity of 5W-30 that meet the requirements of WSS-M2C913-C. In this case, preference should be given to products from Ford or Castrol.

In the absence of these lubricants, it is allowed to use oils with a viscosity index of 5W-30 as topping up, corresponding to ACEA class A5 / B5.

The volume of engine oil required when replacing is:

For 1.0 L Eco Boost(Fox) motors:

4.1 l including oil filter;
4.0 l excluding filter device.

For 1.6 L Duratec-16V-VCT-Sigma motors:

4.1 l with oil filter;
3.75 liters without oil filter.

According to the Ford Focus auto manual, for diesel power units it is recommended to pour Ford or Castrol lubricants with a viscosity of 5W-30 that meet the requirements of WSS-M2C913-C.

Conclusion

The recommended engine oil for Ford Focus has a positive effect on the operation of the engine of the car, increases the operating period of the lubrication system. Therefore, it is important to choose a lubricant suitable for a particular type of engine, given the temperature of the region in which the vehicle will be operated. You should not use fluids designed for the summer at too low temperatures, and lubricants designed for the winter should be poured in the heat. It is possible to buy multigrade oils if the ambient temperature difference corresponds to the operating temperatures of the multigrade fluid.

Please note that continuous driving with engine oils recommended for topping up is prohibited. Such exploitation leads to many negative consequences:

an increase in the amount of harmful impurities in the exhaust gases;
reduction in the efficiency of the motor;
increase in fuel consumption;
decrease in starter resource.

Also consider the base base of motor oils when choosing a lubricant. Synthetic and semi-synthetic fluids operate over a wider temperature range than mineral fluids.

Recommended engine oil for Hyundai Solaris Recommended engine oil for Toyota Corolla
Recommended engine oil for Renault Logan